1. Measure a piece of wood two times and say the measurement out loud, this will help you remember.                      

2. When working with cement, wet the surface, this will make it stick much better.

3. Never set a ladder on loose gravel or a slippery surface or more than a 30% pitch.

4. When land scapeing always use a pitch so water runs away from the house.

5.When driving a nail, tap it lightly till it will stand by its self, move fingers and gradually hit harder as the nail gets deeper in the wood.

6. Shut the water and gas off at the source before any demo work.

7. Always call 1-800 Dig before you dig anything.

8. If you start something wrong-take the time to fixit or it will end up wrong, or hurt some body.

9. When cutting on a table saw-stand to the inside of the rip fence in case of kickback.

10. If you blow a breaker while cutting with a power tool, make sure you turn the tool off before resetting

     Breaker and give it a few minutes to cool off or it will kick again.